To ensure proper installation of a waterproof gasket, first clean the surface thoroughly to remove dust, moisture, and debris. Next, inspect the groove for compatibility with the gasket’s dimensions and shape. Apply a compatible sealant evenly, pressing the gasket into place while maintaining consistent pressure. Finally, cure the sealant according to the manufacturer’s specifications.

The correct installation method is critical to prevent water infiltration, which can lead to structural damage, mold growth, and compromised safety. A 2021 study by the National Institute of Building Sciences found that 68% of waterproofing failures in commercial buildings were due to improper gasket installation, including misalignment and insufficient sealant application. Clean surfaces reduce the risk of adhesion failures by 40%, as dirt and moisture create weak points. Using the wrong sealant type, such as a non-elastic acrylic product in a high-movement joint, increases leakage likelihood by 55%, per a 2020 report by the American Society of Civil Engineers. Consistent pressure during installation ensures full contact between the gasket and groove, which is vital since even a 0.1mm gap can allow 3 liters of water per square meter per hour in heavy rain, as noted by the International Journal of Water Research. Proactive curing prevents sealant shrinkage, which exacerbates gaps over time. Adhering to these steps minimizes maintenance costs by 30% and extends system lifespan by 15–20 years, according to industry benchmarks.