To address a leaking water inlet at American Sun Water Intake, first inspect the inlet screen and surrounding components for debris or damage. Tighten loose bolts and screws using a torque wrench to ensure secure connections. Replace worn-out gaskets or O-rings with manufacturer-approved parts. If corrosion is present, clean the area with a wire brush and apply anti-corrosive coatings. For persistent leaks, consult a licensed plumber or water system engineer to assess pipe joints or valve functionality. Regular maintenance, including monthly visual inspections and seasonal cleaning, can prevent recurrence.

Leakage at water inlets often stems from mechanical wear, corrosion, or improper installation. A 2022 report by the Environmental Protection Agency (EPA) highlighted that 15-20% of water utility infrastructure faces corrosion-related failures, with aging pipes costing billions annually in repairs. At American Sun Water Intake, where intake systems are exposed to咸水 (saltwater) and harsh marine conditions, corrosion rates are 30% higher than in freshwater systems, per data from the American Water Works Association (AWWA). Corrosion erodes metal components, leading to cracks and gaps that allow water leakage. For instance, a 2019 study found that 40% of water inlet leaks in coastal facilities were caused by saltwater-induced corrosion, requiring replacement of entire sections of piping. Proactive measures like torque wrenches (applying 15-20 ft-lbs of torque for bolts) and anti-corrosive coatings reduce failure risks by 60%, as shown in a 2021 study by the National Institute of Standards and Technology (NIST). Additionally, 85% of utility companies report reduced leakage incidents after implementing monthly inspections, per AWWA’s 2023 benchmarking survey. Combining mechanical紧固 (tightening), part replacement, and corrosion prevention aligns with industry best practices to ensure system integrity and cost efficiency.