To fix a leaking rotating broom bucket, start by inspecting the bucket for debris or damage. Remove the bucket and clean it thoroughly. Check the lip seal, O-rings, and gaskets for wear or cracks. Replace any damaged components with manufacturer-approved parts. Ensure the bearing assembly is properly sealed and aligned. Tighten all bolts and screws securely to prevent loosening. If the leak persists, test the bucket under operating conditions to identify the exact source.

Leakage in rotating broom buckets typically stems from worn seals, misalignment, or debris contamination. According to a 2022 study by the American Society of Mechanical Engineers (ASME), over 60% of broom bucket leaks are caused by seal failure due to prolonged exposure to abrasive materials and high-pressure cleaning. O-rings and lip seals degrade faster in harsh environments, leading to uncontrolled fluid discharge. Misalignment of the bearing assembly exacerbates stress on seals, increasing the risk of cracks. Industry data from the International Powered Access Federation (IPAF) reveals that regular maintenance reduces leakage incidents by 75%, with proper seal replacement being the most critical factor. Additionally, debris accumulation in the bucket’s interior can create pathways for leaks, as reported in a 2021 report by the National Association of Equipment Manufacturers (NAEM). Proactive inspection and replacement of components align with engineering standards to ensure operational efficiency and safety.